Flexure | Tinius Olsen

Chamber – (Ambient to 600°C)

towa_admin — Wed, 24 May 2023 11:08:37 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of Ambient-600°C (Ambient-1112°F).
Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

Door is left hinged. Safety interlock operated by door hinge cut heating process when door is opened. Viewing window is central to door 350mm high by 170mm wide. supports use of non contacting extensometer and deflectometers.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (Ambient to 350°C)

towa_admin — Wed, 24 May 2023 11:07:47 +0000

Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-100 to 350°C)

towa_admin — Wed, 24 May 2023 11:05:51 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -100-350°C (-148-662°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-150 to 600°C)

towa_admin — Wed, 24 May 2023 10:46:49 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -150-600°C (-238-1112°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Automated Flex System

towa_admin — Mon, 06 Sep 2021 08:56:39 +0000

Following the on-going innovation in automated systems, Tinius Olsen has introduced Flexural testing as part of the automated testing solution. A flex system is integrated into the automation system cell along with specimen storage, identification & measurement units and a six-axis robot to move specimens to and from the stations.

For safety and security purposes, the automated cell has various options such as interlocking doors and password protection on the specimen rack window and the door. For 24/7 surveillance, the cell is able to integrate camera systems, which can be accessed from a PC, mobile, tablet or even remotely.

Horizon software is equipped to handle end-to-end operations after the specimens are fed into the testing cell. The output package from the software includes results, graphs and videos, all delivered to teams at their workstations, stored for recall and back-up and wrapped with suitable traceability details to support compliance.

Flex Test Grips

towa_admin — Fri, 27 Aug 2021 05:39:43 +0000

Flexural properties are analyzed by testing a material using a 3- or 4-point bend fixture. These jigs have two bottom support spans and one or two loading nose points on top

Model 1500SL

towa_admin — Tue, 10 Aug 2021 07:01:23 +0000

The model 1500SL is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

Tinius Olsen’s hydraulic testers have long been recognized as the standard for accuracy, dependability and versatility in universal testing machines. The many thousands of testers currently in use throughout the world attest to this fact. Now more than ever, the SL series represents the highest standard in hydraulically powered universal testing machines.

Model 50ST

towa_admin — Mon, 09 Aug 2021 09:41:27 +0000

The model 50ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon software.

Model 25ST

towa_admin — Mon, 09 Aug 2021 09:38:24 +0000

The model 25ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

Model 1ST

towa_admin — Mon, 09 Aug 2021 09:19:44 +0000

The 1ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.