Peel | Tinius Olsen

Chamber – (Ambient to 600°C)

towa_admin — Wed, 24 May 2023 11:08:37 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of Ambient-600°C (Ambient-1112°F).
Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

Door is left hinged. Safety interlock operated by door hinge cut heating process when door is opened. Viewing window is central to door 350mm high by 170mm wide. supports use of non contacting extensometer and deflectometers.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (Ambient to 350°C)

towa_admin — Wed, 24 May 2023 11:07:47 +0000

Air is forced over the heating elements located in an insulated enclosure protecting the user and forced into the working chamber area top and bottom. It is then drawn back through the centre of the chamber, through a baffler to the heating elements and recirculated.

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-100 to 350°C)

towa_admin — Wed, 24 May 2023 11:05:51 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -100-350°C (-148-662°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Chamber – (-150 to 600°C)

towa_admin — Wed, 24 May 2023 10:46:49 +0000

Suitable for most twin screw materials testing machines, the Tinius Olsen Environmental Chamber provides a means for performing physical tests within a temperature range of -150-600°C (-238-1112°F).

Controller type Eurotherm model 3016 for single thermocouple temperature control configuration. Optional sub-zero temperature testing is available via a self-pressurising liquid nitrogen Dewar.

The chamber is supported on a frame located between the columns of the testing machine. When the chamber is not in use, the chamber can be rolled back and parked clear of the operating area.

Peel Test Grips

towa_admin — Fri, 27 Aug 2021 04:59:37 +0000

Peel strength testing for adhesive tapes can be performed using different test procedures. The 90 degree peel test is one of the most common since this test generally results in the lowest peeling force. Variations of this test include the 180 degree peel test.

Model 50ST

towa_admin — Mon, 09 Aug 2021 09:41:27 +0000

The model 50ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

A variety of loadcells are available at differing capacities that give precise applied load measurements from the smallest test specimen to ones that go to full machine capacity. Test machines become complete, powerful test systems with the addition of grips to hold the specimen, strain measurement instrumentation and Tinius Olsen’s Horizon software.

Model 25ST

towa_admin — Mon, 09 Aug 2021 09:38:24 +0000

The model 25ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

Model 1ST

towa_admin — Mon, 09 Aug 2021 09:19:44 +0000

The 1ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

Model 10ST

towa_admin — Mon, 09 Aug 2021 06:33:03 +0000

The 10ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.

Model 5ST

towa_admin — Wed, 04 Aug 2021 06:37:13 +0000

The model 5ST is designed for tension, compression, flexure and shear strength testing on materials and assemblies. The robust design incorporates quality materials and components and ensures that our reputation for superior system performance, ease of use, and longevity is maintained.